beautypg.com

Using the radio – Kenwood C-515BT User Manual

Page 16

background image

16

C-515BT/C-313

Manual preset

You can store up to 30 for FM and 10 for AM radio
stations in the memory. When a preset radio stations
selected, the preset number appears on the display.

1

Press TUNER BAND button to select the desired

waveband: FM or AM.

2

Press

4 or ¢ button to tune in to the

desired frequency.

3

Press MEMORY/REPEAT button so that "P – –"

appears on the display.

4

If you want to store the radio station to another

preset number, press FOLDER/P.CALL

A or B,

or digit buttons 0–9 to select the desired preset
number.

5

Press ENTER button again to store the radio

station.

6

Repeat steps 2 to 5 to store other preset radio

stations.

• During preset, if no button is pressed within 20 seconds, the

system will exit preset mode automatically.

Tuning to a preset radio station

Press FOLDER/P.CALL

A or B, or digit buttons 0–9

to select the desired preset number.

The preset number and radio frequency appear on
the display.

• Press the digit buttons as shown below:

FM

AM

To select 1

1 and ENTER

1 and ENTER

To select 2

2 and ENTER

2 and ENTER

To select 10

1, 0 and ENTER

1, 0 and ENTER

Using the radio

Tuning in radio stations

1

Press TUNER BAND button to select the desired

waveband: FM or AM.

2

Press and hold

4 or ¢ button to tune in to

the desired frequency.

• To tune to a weak station, briefly press

4 or ¢ button

repeatedly until the display shows the desired frequency or
when the best reception has been obtained.

STEREO/MONO

Press the STEREO/MONO button to select mono or
stereo mode.

When stereo mode is selected, the icon "STEREO"
appears on the display (if current station is FM
stereo).

• You are able to select stereo or mono mode in FM band only.

Auto preset

Radio stations can be preset automatically in preset

channels.

1

Press TUNER BAND button to select the desired

waveband: FM or AM.

2

Press MEMORY/REPEAT button for more than 2

seconds.

The receivable radio stations are preset
automatically.
When the Auto preset operation has completed,
the unit enters the condition in which preset
station P01 is tuned.

B60-5807-08_02_English.indd 16

09.6.17 9:04:49 AM

This manual is related to the following products: