Kenwood C-515BT - Manual (Page 13)

English
13
Using the CD/USB device/SD card
Preparation
Inserting a disc
1 Press CD/USB/SD button once or more to select
"CD".
2 Press [ 0] button to open the CD door.
3
Insert a disc into the disc loader with the label
side is facing you.
4 Press [ 0] button to close the CD door.
For a CD, the total playtime and total number of
tracks will appear in the display.
For an audio fi le-CD, the total album number and
total fi le number will appear on the display.
Removing a disc
1 Press [ 0] button and carefully pull it out.
2
Press [ 0] button to close the CD door.
Inserting a USB device
1
Press the button to select standby mode.
2
Insert a USB device to the USB connector on the
front panel.
3 Press CD/USB/SD button once or more to select
"USB".
"USB" is displayed. The total album number and
total fi le number will appear on the display.
Removing the USB device
1 Press the button to select standby mode.
2
Remove the USB device.
Inserting an SD card
1 Press the button to select standby mode.
2
Insert the SD card into the SD card slot until it
clicks.
Insert the SD card so that the label side faces
up and the side with a cut comes on the right.
3 Press CD/USB/SD button once or more to select
"SD".
The total album number and total fi le number will
appear on the display.
Removing the SD card
1 Press the button to select standby mode.
2
Remove the SD card.
⁄
• To ensure good system performance; wait until the unit
completely reads the disc/USB device/SD card before
proceeding.
• If the disc compartment is not loaded with a disc, "NO DISC" is
displayed.
• If the disc is unreadable or there is no playable audio file in
the USB device/SD card , "NO DATA" is displayed.
• For audio files, reading time may exceed 10 seconds due
to the large number of songs compiled into one disc/ USB
device/ SD card.
• The icon "MP3" appears only when an MP3-file is played.
The icon "WMA" appears only when an WMA-file is played.
B60-5807-08_02_English.indd 13 09.6.17 9:04:48 AM