Kenwood MGR-E8-B User Manual

Page 12

MGR-E8

Names and functions of parts

~ REC button

• Press to enter recording standby

mode. Press again to start
recording.

• Press during recording to enter

recording pause mode. Press
again to resume recording.

• Rec indicated by the indicator

Steady lighting

Recording mode

Blink

Recording standby or
Recording pause mode

Extinguished

Stop mode

! EDIT button

• Press during stop mode or while

the list is displayed to open the
file edit screen.

• Press during playback to add/

delete favorite tracks or set A-B
repeat.

• Press during recording standby

to set the AUTO recording level
adjustment.

• Press during recording to divide

the recorded file at the point
where the button is pressed.

@ Volume button

• Press to increase (

5) or decrease

(

∞) the volume. Pressing and

holding a button segment varies
the volume gradually.

# Strap eyelet

• Pass the strap through this hole.
CAUTION
• Do not pass a metallic hook or

like (a key holder, etc.) through
the strap eyelet. Otherwise, this
unit may be damaged.

• Do not swing around the unit by

holding the strap. If the unit hits
a person, an injury, malfunction
or damage may result.

$ LINE OUT Line output
% Phones jack
^ MIC Microphone input
& LINE IN Line input
* HOLD switch

• ALL : Press to defeat all other

buttons. This helps prevent
erroneous operation of this unit
when it is carried in a bag, etc.

• REC : Press to defeat only the

REC button. This prevents
unintended recording mistake
during playback of music, etc.

( Speaker

• When nothing is connected to

[

$ LINE OUT] terminal and [%

] Phones jack, the speaker

output the audio of the track
being played.

• The speaker does not output any

audio during recording.

B60-5825-08_00_MGR-E8(E)_English_1AJ6P1P0109--(XE0).indd 12

10/08/04 13:48