beautypg.com

Function settings – Kenwood KDC-BT41U User Manual

Page 26

background image

26

English

Function settings

1

Press SRC to select a source other than “STANDBY”.

2

Press the volume knob to enter [FUNCTION] mode.

3

Turn the volume knob to select [AUDIO CONTROL/ AUDIO CTRL] or [SETTINGS], then
press to enter.

4

Turn the volume knob to make a selection, then press to confirm.

See table below for selection.

Repeat step 3 until the desired item is selected/activated.

Press

to return to the previous item.

5

Hold

to finish the procedure.

[AUDIO CONTROL/ AUDIO CTRL] : While listening to any source except in STANDBY state or
Bluetooth mode.

Item

Selectable setting (Preset: *)

SUB-W LEVEL

–15 — 0 * — +15: Adjusts the subwoofer output level.

BASS BOOST

B.BOOST LV1 */ B.BOOST LV2: Selects your preferred bass boost level. ; OFF: Cancels.

SYSTEM Q

NATURAL */ USER/ ROCK/ POPS/ EASY/ TOP40/ JAZZ/ GAME: Selects a preset sound mode suitable to the
music genre. (Selects [USER] to use the customized bass, middle, and treble settings.)

BASS ADJUST

BASS CTR FRQ/
BASS C FRQ

40/ 50/ 60/ 70/ 80/ 100 */ 120/ 150: Selects the center frequency.

BASS LEVEL

–8 — 0 * — +8: Adjusts the level.

BASS Q FACTOR/
BASS Q FCTR

1.00 */ 1.25/ 1.50/ 2.00: Adjusts the quality factor.

BASS EXTEND

ON: Turns on the extended bass. ; OFF *: Cancels.

MID ADJUST

MID CTR FRQ/
MID C FRQ

0.5K/ 1.0K/ 1.5K/ 2.0K *: Selects the center frequency.

MID LEVEL

–8 — 0 * — +8: Adjusts the level.

MID Q FACTOR/
MID Q FCTR

1.00 */ 2.00: Adjusts the quality factor.

TRE ADJUST

TRE CTR FRQ/
TRE C FRQ

10.0K/ 12.5K */ 15.0K/ 17.5K: Selects the center frequency.

TRE LEVEL

–8 — 0 * — +8: Adjusts the level.

BALANCE

L15 — 0 * — R15: Adjusts the left and right speaker output balance.

FADER

R15 — 0 * — F15: Adjusts the rear and front speaker output balance.

SUBWOOFER SET/
SUB-W SET

ON *: Turns on the subwoofer output. ; OFF: Cancels.

DETAILED SET/
DETAIL SET

HPF FRONT

THROUGH *: All signals are sent to the front speaker. ;
40/60/80/100/ 120/150/180/220 (HZ): Frequencies lower than the specified value are cut off.

B64-4799-00_00_E_English.indd 26

B64-4799-00_00_E_English.indd 26

10/12/03 9:56

10/12/03 9:56

This manual is related to the following products: