Kenwood KDC-3051R - Manual (Page 11)

11
ENGLISH
[SETTINGS]
Item Selectable setting (Preset: *)
AUX NAME AUX */ DVD/ PORTABLE/ GAME/ VIDEO/ TV: Selects the desired name for the connected component.
(Selectable only if “AUX” is selected as the source.)
CLOCK CLOCK ADJ: (For details, see page 6.)
TIME SYNC: ON *: Synchronizes the RDS station time data and the unit's clock. ; OFF: Cancels.
DISPLAY DIMMER SET: ON: Dims the display illumination. ; OFF *: Cancels.
TEXT SCROLL: AUTO/ ONCE: Selects to scroll the display information automatically, or scroll only once. ;
OFF *: Cancels.
RDS SET NEWS SET/ AF SET/ RDS REG/ ATP SEEK: Selectable only if any source other than tuner source is selected.
(For details, refer page 7.)
Troubleshooting
Symptom Remedy/Cause
Sound cannot be heard. Adjust the volume to the optimum level. / Check the cords and connections.
“PROTECT” appears and no
operations can be done. Check to be sure the terminals of the speaker leads are covered with insulating tape properly,
then reset the unit. If “PROTECT” does not disappear, consult your nearest service center.
The unit does not work at all. Reset the unit.
[P-OFF WAIT] does not work. Turn off the demonstration mode. (page 6)
Radio reception is poor. / Static
noise while listening to the radio. Connect the antenna firmly. / Pull the antenna out all the way.
“IN” flashes. The CD player is not operating properly. Reinsert the disc properly. If the condition did not
improve, turn off the unit and consult your nearest service center.
CD-R/CD-RW cannot be played
back and tracks cannot be skipped. Insert a finalized CD-R/CD-RW (finalize with the component which you used for
recording).
Disc sound is sometimes
interrupted. Stop playback while driving on rough roads. / Change the disc. / Check the cords and
connections.
“NA FILE” appears. The unit is playing an unsupported audio file.
“NO DISC” appears. Insert a playable disc into the loading slot.
“TOC ERROR” appears. The CD is quite dirty. / The CD is upside-down. / The CD is scratched a lot. Try another
disc instead.
“ERROR 99” appears. The unit is malfunctioning for some reason. Press the reset button on the unit. If the
“ERROR 99” code does not disappear, consult your nearest service center.
“COPY PRO” appears. A copy-protected file is played.
Noise is generated. Skip to another track or change the disc.
Tracks cannot play back as you
have intended them to play. Playback order is determined when files are recorded.
“READING” keeps flashing. Longer readout time is required. Do not use too many hierarchies and folders.
Elapsed playing time is not correct. This is caused by how the tracks are recorded.
Correct characters are not displayed
(e.g. album name). This unit can only display letters (upper case), numbers, and a limited number of symbols.
Cyrillic alphabets (upper case) can also be displayed if [RUSSIAN SET] is set to [ON].
(page 4)
EN02-15_KDC-3051R[E]f.indd 11 EN02-15_KDC-3051R[E]f.indd 11 8/5/10 9:07:11 AM 8/5/10 9:07:11 AM