Actiontec electronic Wireless-Ready - Manual (Page 41)

38
Actiontec Wireless-Ready DSL Gateway
DSL Settings
To access DSL Settings, select DSL Settings from the “Utilities” screen. The
Gateway’s VPI , VCI , and Mode settings can be changed from here. Actiontec recom-
mends not changing these values without consulting the ISP .
Restore Default Settings
To restore the Gateway to its factory default settings, select Restore Default
Settings from the “Utilities” screen. When the “Restore Default Settings” screen
appears, click Restore Default Settings. Any changes made to the Gateway’s settings
will be lost and the factory default settings will be restored. During this process, the
Gateway’s power
LED flashes and the Gateway is disabled. When the power LED
stops flashing and glows steadily green, the Gateway is fully operational.
Upgrade Firmware
Selecting Upgrade Firmware in the “Utilities” screen generates the “Upgrade
Firmware” screen. Actiontec periodically posts firmware upgrades to enhance the
Gateway’s capabilities.