Siemens HF25M5L2 - Manual (Page 7)

7
Changing the setting
Changes can only be made before operation begins. Press the
2 button repeatedly until the number for the series of
operations appears. Change the setting.
Opening the appliance door during operation
Operation is suspended. After closing the door, press the start
button. Operation will then continue.
Pausing operation
Press the stop button to pause operation.
Press the start button to continue operation.
Cancelling operation
Press the stop button twice and use the
Ž button to switch
off the appliance.
Memory
The memory gives you the option to store your own settings
and call them up again at any time. You have two memories
available: "
j " and " k ". The memory is useful if you prepare
one dish particularly frequently.
Saving settings in the memory
1. Press the Ž button.
Your appliance is ready for use.
2. Press the button for the microwave power setting you require.
The display above the power lights up and a suggested
cooking time is displayed.
3. Set the cooking time using the rotary selector.
4. Press and hold the
j or k button for a few seconds until a
signal sounds.
The setting is saved and can be started at any time.
Saving another setting
Enter and save the new setting. The old settings are
overwritten.
Note: The programmes which have been set remain stored
even if there is a power cut.
Starting the memory
You can start cooking at any time using the settings saved for
your meal.
1. Press the Ž button.
Your appliance is ready for use.
2. j or ( button. k
The stored settings are displayed.
3. Press the start button.
The memory setting starts. The
x cooking time counts down
in the display.
Note: Once operation has started, you can no longer change
the memory location.
The cooking time has elapsed.
A signal sounds. The memory function has finished. Use
the Ž button to switch off the appliance or make new
settings. You can stop the audible signal by pressing the 0
button.
Pausing
Press the STOP button or open the appliance door. Operation
is suspended. After closing, press the start button. Operation
will then continue.
Changing the basic settings
Your appliance has various basic settings which you can
change at any time.
Basic settings
In the table, you will find all the basic settings and options for
changing them.
Prerequisite: your appliance is switched off.
1. Press and hold the
0 button for a few seconds.
The first basic setting appears in the display.
2. You can change the basic setting by turning the rotary
selector.
3. Confirm by pressing the
0 button.
The next basic setting appears in the display. You can go
through all of the basic settings with the
0 button and make
changes with the rotary selector.
4. To finish, press and hold the 0 button for a few seconds.
All settings are applied.
Basic setting Options Explanation
™‚ Clock display
‚ = on
Clock display
ƒ = off
Displays the clock
™ƒ Signal duration
ƒ = medium = 2 minutes
‚ = short = 10 seconds
„ = long = 5 minutes
Audible signal after the cooking time has
elapsed
™„ Button tone
‚ = on
Button tone
ƒ = off
Confirmation tone when a button is pressed
™… Waiting time
ƒ = medium = 5 seconds
‚ = short = 2 seconds
„ = long = 10 seconds
Waiting time between two separate steps,
after setting