Siemens KI42FAD30 - Manual (Page 30)

en
30
Switching the
appliance on
Fig. "
Switch on the appliance with the On/Off
button 1.
The temperature display 4 indicates the
set temperature.
The appliance begins to cool. Light is
switched on when the door is open.
We recommend a factory setting of +4
°C in the refrigerator compartment.
Do not store perishable food warmer
than +4 °C.
Operating tips
■
After the appliance has been switched
on, it may take several hours until the
set temperatures have been reached.
Do not put any food in the appliance
beforehand.
■
The temperature in the freezer
compartment depends on the
temperature in the refrigerator
compartment. Warmer refrigerator
compartment temperatures also cause
warmer freezer compartment
temperatures.
■
The sides of the housing are partly
heated slightly. This prevents
condensation in the area of the door
seal.
Setting
the temperature
Fig. "
Freezer compartment
The temperature in the refrigerator
compartment will affect the temperature
in the freezer compartment. Change the
temperature in the refrigerator
compartment in order to change the
temperature in the freezer compartment.
Temperatures which are set higher in the
refrigerator compartment will increase
temperatures in the freezer
compartment.
Refrigerator compartment
The temperature can be set from
+3 °C to +8 °C.
Keep pressing temperature setting
button 3 until the required refrigerator
compartment temperature is set.
The value last selected is saved. The set
temperature is indicated on temperature
display 4.
Cool-fresh compartment
The temperature in the cool-fresh
compartment is about 0 °C.
Note
If frost forms on the refrigerated food in
the “cool-fresh” compartment, increase
the temperature (see chapter Eliminating
minor faults yourself).