Siemens LU19050 - Manual (Page 24)

24
4
4. Secure the nuts inside the box of the
hood on the square slots and screw in,
from outside, the metric screws supplied
to their maximum.
7 mm
5
6
6
7
5. Hook the hood to the upper screws.
6. Adjust the structure of the hood.
7. Insert and totally screw the screws in the
lower holes for the final fixing.
❑ Reinstall the grease filters (see
Instructions for use)
Installation Final assembly
Selecting the operating mode:
A
F
❑ Exhaust-air mode: Position A
A
F
❑ Circulating-air mode: Position F
❑ Refit the grease filter.
❑ Connect to the power supply.