Kenwood TK-6110 - Manual (Page 15)

11
DTMF CALLS
You can make DTMF calls using the optional KMC-28A DTMF microphone.
■ Manual Dialing
To dial a number manually:
1 Press and hold the PTT switch.
• If Keypad Auto PTT is enable, you do not need to press the PTT switch (please
consult your dealer for enabling this function).
2 Enter your desired digits.
■ Redialing
A maximum of 16 digits can be redialed. The last number dialed, either
manually or automatically, will be redialed.
To redial a number:
1 Press the key.
• An “A” will appear on the display.
2 Press the 0 key.
• The transceiver will redial the last dialed number, and the digits will appear on
the display.
Note: If the transceiver power is switched OFF, the redial memory will be erased.
■ Auto Dialing
Note: Auto dialing is either enabled or disabled by your dealer.
Store:
To store a number in memory:
1 Press the # key.
• A “D” will appear on the display.
2 Enter up to a maximum of 16 digits.
• To enter A, B, C, D, , or #, press and hold the PTT switch, then press 2, 5, 8,
0, , or # (respectively).
3 Press the # key.
4 Select the desired memory channel by pressing a key (1 ~ 9).
• The number entered in step 2 will be stored in the memory channel selected.