Kenwood TK-6110 - Manual (Page 14)

10
■ Switching Power ON/ OFF
Press the IO switch to switch the transceiver ON. Press and hold the IO
switch for approximately 1 second to switch the transceiver power OFF.
• The display backlight illuminates when the power is switched ON.
■ Adjusting the Volume
Turn the Volume control clockwise to increase the volume, and
counterclockwise to decrease it.
■ Selecting a Channel
Press the Channel Up and Channel Down keys to select your desired
channel. Channel Up increases the channel number and Channel Down
decreases it.
■ Making a Call
1 Select your desired channel (above).
• Listen to the channel for a few seconds before transmitting to make sure it is
not in use.
2 Press the PTT switch, then speak into the microphone in your normal
speaking voice.
• For best results, hold the transceiver approximately 3 to 4 cm (1 1/2 inches)
from your lips.
3 Release the PTT switch to receive.
4 Replace the microphone on its hanger when the call is finished.
BASIC OPERATIONS