Rc-d710 e 20-33 menu op.pdf, Menu mode, Menu access – Kenwood RC-D710 User Manual

Page 26

MENU MODE

Many functions on this RC-D710 are selected or configured through the Menu
instead of physical controls. Once you become familiar with the Menu system,
you will appreciate the versatility it offers.

MENU ACCESS

1 Press

[F], Tuning control to access the Menu.

• The setup category name appears on the display.

<RC-D710 + PG-5J>

2 Rotate

the

Tuning control to select your desired setup category.

3 Press

the

Tuning control to set up the current category.

• The Menu name and number appears on the display.

4 Rotate

the

Tuning control to select your desired Menu.

5 Press

the

Tuning control to set up the current Menu.

6 Rotate

the

Tuning control to select your desired value for the selected Menu.

7 Press

the

Tuning control to set the selected value.

8 Repeat steps 2 to 7 to set up additional Menus.

• Press

[ESC] at any time to exit Menu mode.

• Press

[BACK] at any time to cancel the Menu setup and return to the Menu

selection.