Kenwood RC-D710 - Manual (Page 18)

12
OPERATION PANEL (FRONT)
■ IN NORMALMODE
q Tuning Control
Press [F], then press the Tuning control to enter Menu mode.
w F
Press [F] to enter Function mode.
e TNC
Each time you press [TNC], the mode toggles between APRS (or NAVITRA)
mode ON and PACKET mode ON.
• When “OPENING TNC” appears on the display, the mode cannot be changed.
r PM
Press [PM] to enters the PM (Programmable Memory) channel selection
mode.
t
Press [ ] to turn the transceiver power ON and OFF.
Note: For [MSG], [LIST], [BCON], [POS], and [P.MON] keys, refer to the APRS explanation.
■ IN FUNCTION MODE