Hot Max Torches 250WFG - Manual (Page 10)

Operation
KDAR Company 9
Electric Shock Can Kill
 Do not touch live electrical parts of the electrode with skin or wet clothing.
 Insulate yourself from work and ground.
 Always wear insulated gloves and keep them dry.
Safety Considerations
Warning
Fumes & Gases Can Be Hazardous
 Plasma cutter should only be used in a well ventilated area or with an exhaust
system.
 Keep your head away from the fumes.
Arc Rays Can Burn Skin and Eyes
 Always were eye, ear and body protection.
Cutting Sparks Can Cause Injury, Fire , or Explosion
 Do not use near flammable material.
 Do not cut or gouge on containers that have held combustibles.
Gas Hook Up (cont.)
7. Reopen the regulator valve until the flow indicator shows
15 L/min (initial flow setting). The setting may need to be
adjusted by the operator to compensate for welding condi-
tions.
8. Always close the cylinder valve and open the regulator
valve when not in use.
Properly
Secured
Tank