Hot Max Torches 175WFG - Manual (Page 5)

KDAR Company 4
Specifications
Features & Benefits
 Light weight, small size all steel case.
 Easy to use.
 MIG/MAG ready, regulator and 5’ hose in-
cluded.
 Optional spool gun available.
 Infinite output voltage level.
 Infinite wire feed speed control.
 Wire at gun is “cold” when not welding.
 Power on indicator light and overload indicator
light equipped.
 Fan cooled.
 20% duty cycle minimum.
 Welds 22 gauge to 3/8” with flux cored wire.
 Built in wire feeder with easy to use tension
adjustment lever.
 Dual size groove drive roller to fit sizes .23”
to .35” wire (.6 to .9 mm).
 Easy polarity change for switching to and from
gas.
 Flux covered (FCAW) set up from the factory,
ready to weld.
 Welds steel, aluminum, and stainless (special
gas required for aluminum and stainless).
 2 year limited warranty on the machine.
 90 day limited warranty on gun and hose.
 Comes with the following components.
 2 replacement tips
 Hex wrench to change wire feed roller.
 Gas nozzle for MIG welding.
 10# spool adaptor .
 Gas regulator
 5’ gas hose
 2# Spool .030” Flux Core Wire
Table 1
Rated input 230VAC, 60 hertz, 22 amps
Maximum output open-circuit voltage 35 volts DC
Rated output 130 AMPS@20volts 20%duty cycle
Wire feed rate 59 to 472 in/min (1.5-12m/min)
Specifications of applicable welding
wire
.025”-.030” (0.6-0.8mm) solid steel
.030”-.035” (0.8-0.9mm) Flux-Cored
Welding Wire Spool 8”x2” (200mmx50mm)
4”x2” (100mmx50mm)
Weight 54 lb (26 kg)
Dimensions (Length*Width*Height) 16”x9.6”x14.5” (408x244x367)