350 super technics, Plates and labels, Optional – Dake Model Super Technics 350CE User Manual

Page 21

350 SUPER TECHNICS

14.1 - Pneumatic vice

- System for clamping material during the cutting operations,

with an automated pneumatic device.
It is provided with an anti-burr device for blocking the part of
the piece that has been cut off.

PLATES AND LABELS

14.2 - Connection to the pneumatic system

- Connect the tube of the pneumatic system to the filter unit

part ( 1 ) and check that the pressure gauge part ( 2 ) shows
a pressure of 6 - 7 BAR, sufficient to ensure optimum
functioning of the device.

- The vice opening mechanism is controlled by the valve part

( 1 ) operated only if the head is completely lifted.

- Leave a play of 3 - 4 mm between the jaw and the piece to be

clamped, then lower the head to block the piece.

OPTIONAL