Wing tube jack bracket, Cables, Auto-fold cable fold option – Summers 3-Rank Superweeder User Manual
Page 22
3-4
SECTION 3 – SET-UP INSTRUCTIONS — SUPERHARROW
WING TUBE JACK BRACKET
A wing tube jack bracket is provided with all machines and allows for mounting the hitch jack on the wing tube for more
stability (See Fig. 6).
CABLES
Install cable brackets and cable assemblies as shown in figures 1, 2 and 7. Secure brackets using 3/4” U-bolts, lock washers
and nuts. Two cables are required for each wing on the split wing models.
NOTE: Adjust cables so wings slightly lead center when standing in field position.
IMPORTANT: On machines with two cables per wing, the cables must be adjusted so the outside wing slightly leads
the inside wing.
AUTO-FOLD CABLE FOLD OPTION
See Sections 5 and 6 for 16’ and 20’ hitch Auto-Fold instructions.
Fig. 6 Wing Tube Jack Bracket
Fig. 7 Mounting Cable Pull Clamps