Videoswitch Vi-K3 - Manual (Page 97)

Vi-K2/Vi-K3 Universal
Keyboard
Vi-K2 Universal Keyboard User Manual
95
• While the display shows flashing “rEC”, pressing one of the number keys 1, 2, 3…16 will move to
a preset (See “Presets” above).
To finish programming a tour:
• Holding
the
ALT key on, press the PROG key to finish the tour programming.
24.8 Menus
The Vi-K2/Vi-K3 has a special mode to make access to dome menus very easy:
• Press
the
DOME key on the Vi-K2/Vi-K3.
• The letters “Do” will appear on the display.
While the “
Do” is being displayed, some of the keys on the Vi-K2/Vi-K3 have special functions as follows:
• Press
the
MENU key to enter the dome user menu.
• Use
the
Up, Down, Left, Right arrow keys to navigate within the dome menu.
• Press
the
OK key to enter a sub-menu or to accept a menu setting.
Please Note for JUNO domes to select menu options please use focus in on joystick rather then ok key.
24.9 Other Commands
180
° turn
• Press and hold ALT then the F1 key
Alarm acknowledge (Alarms 01 – 08)
• Press and hold ALT while pressing F9 – F16
Auxiliary (01 – 08)
• Aux 1: Press and hold ALT then press the RELAY key to toggle.
• Aux 2: Press the LAMP key to toggle.
• Aux 3: Press the WASH key and hold to set, release to clear.
• Aux 4: Press the WIPE key to toggle.
• Aux 5-8: Press and hold ALT then press the one of the F5 - F8 keys.