Vt-11 – Videoswitch VT User Manual
Page 18
VT Series 2
User Manual
Page 18
Videoswitch
VT601c.doc
8.4 Interval Switching Mode
This switch should be set off if the cameras are synchronised (gen-locked). It should be set on if the
cameras are not synchronised to avoid picture bounce during switching.
S1-7
Interval Switching Mode
OFF
Immediate switch-over at vertical sync
ON
Blank fields inserted between vertical sync
pulses during switch-over
8.5 SET Lockout
All SET function for both the switcher set-up and receiver set-up can be locked out. Once the required
settings have been made, it is advisable to set the lockout switch to on to avoid accidental alteration of any
of the settings.
VT-11:
S3-1
SET Functions Lockout
OFF
SET functions not locked out
ON
SET functions locked out
VT-14A, VT-18A and VT-28A:
S1-8
SET Functions Lockout
OFF
SET functions not locked out
ON
SET functions locked out
8.6 Camera Termination
The camera inputs are provided with switchable termination:
Switch
Camera
Input
OFF
ON
S2-1
1
Not Terminated
75
Ω
Termination
S2-2
2
Not Terminated
75
Ω
Termination
S2-3
3
Not Terminated
75
Ω
Termination
S2-4
4
Not Terminated
75
Ω
Termination
S2-5
5
Not Terminated
75
Ω
Termination
S2-6
6
Not Terminated
75
Ω
Termination
S2-7
7
Not Terminated
75
Ω
Termination
S2-8
8
Not Terminated
75
Ω
Termination