VariZoom VZM5 User Manual
Page 3
At the right you’ll see a mechanical drawing of the M5 monitor. Note
that items 11 (HDMI Plug Lock) and 16 (7.2V battery plate) are
optional accessories (not included in this kit).
Using the Monitor for the First Time
Although this is essentially a plug-and-play type monitor, there are a
few things to note before you begin using it.
o -There is a sheet of protective film covering the screen
–
remove this before using the monitor.
o -Do not block the air vents on the monitor
o -Do not
plug anything into the “Zoom” port other than the
special Zoom/Peaking Trigger Remote accessory (NOTE:
Never plug a camera zoom control into this port).
o -Never use the AC adapter and battery at the same time
–
only use one power source at a time.
Connect the AC power supply to the monitor (14) and power up
your camera.
Connect the HDMI cable to your camera and the monitor. If you
need the HDMI signal to go to another monitor or location, use the
“HDMI OUT” (13).
Turn on the power switch located at the back of the monitor (15).