High Country Tek HFS-J-Bus - Manual (Page 15)

Electronic Controller Solutions for the Global Fluid Power Industry
Hydraulic Fan System Controller with SAE J1939 Interface
HFS-J User Guide
Part No:- 021-00158 Rev C HFS-J Hydraulic Fan System Controller User Guide Page | 15
Loading the HFS-J GUI onto Host PC:
The PC Graphical User Interface ( GUI ) is a self extracting and installing program that will reside on the chosen host
PC hard drive. It is recommended that the user allow the defaults to be used for easy future update installation, but
the option is given to allow the user to choose where the program should be located.
It is NOT recommended that this program be run from a network as it needs access to certain files available only in
the Windows directories.
To start the installation process, insert the CD ROM or if this does not work, search for the executable ( *.EXE ) file on
the CD and ‘run’.
HFS-J Software:
System Requirements
Windows XP
256MB or greater
Serial Port RS232 or USB Adapter
RS232 Serial Cable PN: 999-10075
Closed Loop Controller software.
Note:
This module and software is
compatible with Windows XP
only. For other operating system
compatibility information, please
contact HCT’s customer service.
Installing the HFS-J Software
•
The HFS-J Graphical User Interface part number is:- P/N: 023-00218
• Ensure you have the latest version of software for this module ( the HCT website www.hctcontrols.com has a
‘Downloads’ area that has any updates you may need if you are unsure.
• Run Setup.exe from the install CD.
• Follow the instructions as you are prompted.
Figure 1, Main Screen ( Dashboard )