0 description – ARI Armaturen CONA TD PN63 EN User Manual
Page 3

Rev. 0040806000 2404
Page 3
Operating and installation instructions
CONA
®
TD - Thermodynamic steam traps
4.0 Description
4.1 Scope of applications
Thermodynamic steam traps are used for the drainage of industrial steam facilities.
The information complies to the Pressure Equipment Directive 97/23/EC.
It is the responsibility of the machine planner to ensure compliance.
The special markings on the valve must be taken into account.
Refer to the catalogue sheet to see which materials are used in standard versions.
Please contact the supplier or the manufacturer if you have any questions.
ATTENTION !
- Refer to the data sheet for applications, limits on use and possibilities.
- Certain media require or preclude the use of special materials.
- The valves are designed for standard operating conditions. If conditions exceed
these requirements, e.g. aggressive or abrasive media, the operator should
state the higher requirements when ordering.
- Valves made from GG-25 are not authorised for use in systems subject to TRD
110.