HighPoint RocketRAID 2302 - Manual (Page 7)

Introduction
LED support - disk activity and disk failure status (RR2300, 2302
models)
Quick and Background initialization for quick RAID 5 configurations
BIOS boot support (INT13)
Command Line Interface for RAID management (CLI)
Graphical RAID Management Software (RAID Management Console)
Web-based RAID Management Software
Automatic RAID rebuild
SMTP support for email notification
Windows/Win x64, Linux and FreeBSD support
Understanding RAID Concepts and Terminology
The following concepts and terminology is commonly used when describing the
functions of the RocketRAID 230x Host Adapter cards.
Disk initialization
Initializing a disk writes necessary RAID configuration information to that disk. Disks
must be initialized before configuring them into RAID arrays. The initialization
process will destroy all data on the disk.
Disk Status
New The disk contains no data and has not been initialized.
Initialized The disk has been initialized and can be used for array creation.
Configured The disk has been assigned to one or more arrays, or configured as a
spare disk.
Legacy The disk was used on other controllers before use with the RocketRAID
230x (see legacy disk below).
1-2