Vaisala MMT330 - Manual (Page 34)

User's Guide _______________________________________________________________________
32 ___________________________________________________________________ M210733EN-G
Panel Mounting Frame
To enable a neat and dirt free embedded installation of the transmitter, a
panel mounting frame is available as an option (Vaisala order code:
216038). The frame is a thin, flexible plastic frame for the transmitter,
with adhesive tape on one side.
The frame is used to hide any rough edges of the installation hole, and
provide a more finished look. Note that the panel mounting frame is not
intended to bear the weight of the transmitter, and does not include any
mounting supports.
Use the panel mounting frame as follows:
1. Use the frame as a template to mark the required size for the
installation hole in the panel.
2. Cut the hole in the panel.
3. Mount the transmitter through the panel with suitable supports.
4. Remove the paper protecting the adhesive tape on the frame, and
attach the frame around the transmitter. Refer to Figure 14 on page
32.
0704-002
Figure 14 Panel Mounting Frame
The following numbers refer to Figure 14 above:
1 = Panel (not included)
2 = Panel mounting frame