Figure 63, Ip configuration, Figure 64 – Vaisala MMT330 User Manual
Page 137: Wireless lan settings, Figure 65, Communication protocol
Chapter 5 ___________________________________________________________________ Modbus
VAISALA _______________________________________________________________________ 135
1101-034
Figure 63
IP Configuration
4.
Navigate back to the Network Settings menu. If you are using the
WLAN interface, select Wireless LAN Settings.
5.
On the Wireless LAN Settings screen, set the network name
(SSID) and security options, and exit to save the changes.
1101-036
Figure 64
Wireless LAN Settings
6.
Navigate back to the Network Settings menu. Select
Communication Protocol.
7.
On the Communication Protocol screen, enable the Modbus
protocol. Press the EXIT button to save the changes.
Note that the device address setting is not relevant for Modbus
TCP. In the Modbus mode, the transmitter will respond to all valid
Modbus messages with any “unit identifier” value.
1101-034
Figure 65
Communication Protocol
8.
Modbus configuration is now complete, as configuration changes
made with the display and keypad are effective immediately.