Vaisala HMP46 - Manual (Page 63)

HMI41 AND PROBES
M210316EN-A Operating Manual
59
4. TRANSFERRING THE MEASURED DATA TO A PC
Give the communication parameters when using this terminal session for the
first time; save them for future use. See instructions in the following tables.
Table 4.1 Giving parameters in Windows 3.1
MENU DESCRIPTION
P ROGRAM M ANAGER
ò
A CCESSORIES double click
ò
T ERMINAL double click
ò
Settings click
ò
Communications
click and select parameters
(see list below); click OK
ò
move the cursor to:
File click
ò
Save as click and save settings: type
the name of the file (e.g.
HMI41) and click OK
Turn the HMI41 on and follow the instructions in Ch. 4.2
The communication parameters are:
•
connector according to your computer
•
baud rate 4800
•
data bits 7
•
stop bits 1
•
parity even
•
flow control none