Vaisala HMP46 - Manual (Page 25)

HMI41 AND PROBES
M210316EN-A Operating Manual
21
6.2 Manual data collecting
For manual data collecting, press the button MODE and the following appears:
Press ENTER and a text similar to the following appears:
RH
set
T °C
%
The probe is now taking measurements and you can store the readings at
appropriate intervals by pressing the button HOLD. Each time you store a
reading, its sequence number in the indicator memory appears for a couple of
seconds:
The indicator returns automatically to show the readings. You can store 199
measurement readings in the indicator memory (numbers 1 - 199). In
automatic data collecting, you can store 200 readings (0 - 199). End data
collecting by turning the indicator off. You can read the readings in the
REC
READ mode (see Chapter 6.5).