Allied Telesis AlliedWare NetScreen Routers - Manual (Page 10)

Use Dynamic DNS To Allow You To Host Servers Behind A Dynamically-Assigned Public IP Address 10
The following figure shows an example output from the command show ddns once a
dynamic DNS update has occurred.
log entry You can also check the router log to see information about the dynamic DNS update. Use
the command:
show log
The following figure shows the log entry for a successful dynamic DNS update.
DDNS Config Information:
Client State ....................... ENABLED
Debug .............................. ENABLED
Server ............................. members.dyndns.org
Port ............................... 80
User ............................... test
Password ........................... ****
system name ........................ dyndns
hosts ............................ test.dyndns.org
Wildcard ........................... off
Offline ............................ no
Primary WAN Interface .............. ppp0
Secondary WAN Interface ............ ppp1
DDNS Operation Information:
Server IP .......................... 63.208.196.95
IP in DynDns ....................... 222.152.186.174
Current IP ......................... 222.152.186.174
07 10:36:18 5 DDNS MSG INFO Dynamic DNS update succeed. Host test.dyndns.org
is 222.152.186.174.
-------------------------------------------------------------------------------