Maxsa Innovations Battery-Powered Motion-Activated LED Outdoor Wall Sconce in Golden Copper - Manual (Page 3)

TROUBLESHOOTING
MAXSA Innovations
8412 Cathedral Forest Drive
Fairfax Station, VA 22039
Tel: 703-495-0661
www.maxsainnovations.com
©2012 MAXSA Innovations, LLC
MADE IN CHINA
Light does not turn on
when there is movement
in the detecton area.
Light turns on for no
apparent reason (false
trigger).
Light turns on during
daylight hours.
1. Batteries are old.
2. Nearby lighting is too bright.
3. The light is facing the wrong direction.
1. Heat sources such as air conditioners,
vents, barbecues, other outside lighting, or
moving cars are false triggering the
motion sensor.
2. Pets or other animals are false triggering
the motion sensor.
3. Reflections from swimming pools,
jacuzzis, white walls, or other large
reflective surfaces are false triggering the
motion sensor.
1. Replace the batteries.
2. Install the
LED Outdoor Wall Sconce in a
different location or facing a different
direction, away from other lighting.
3. Install the LED Outdoor Wall Sconce
facing the desired detection area.
1. Install the LED Outdoor Wall Sconce away
from the sources of interference.
2. Mounting the LED Outdoor Wall Sconce
higher or facing the light in a different
direction may help.
3. Install the LED Outdoor Wall Sconce away
from the sources of reflections.
1. Install the LED Outdoor Wall Sconce in a
non-shaded location or facing a direction
away from sources of shadows.
N O I T U L O S E L B I S S O P E S U A C E L B I S S O P M E L B O R P
SPECIFICATIONS 1 YEAR WARRANTY
page 3
1. This occasionally will happen and is
natural. The light sensor does not get
enough sun to prevent the light from
activating. This is caused by a roof, wall,
tree, or other object is casting a shadow on
the sensor.
This LED Outdoor Wall Sconce is warranted against faulty material and /or
workmanship for a period of 1 year from date of original purchase. The
obligation of the manufacturer, under this warranty, is limited to servicing
and replacing defective parts when the unit is returned to MAXSA Innova-
tions, freight pre-paid during the warranty period. To obtain warranty
repair, the purchase receipt should be returned with the product.
This warranty becomes void on any unit which has been tampered with,
damaged by accident, or damaged otherwise by improper operation. This
guarantee is in addition to any guarantees implied by State or Federal
Legislation. Batteries Required: 4-C cell alkaline, Ni-MH, or
Ni-Cd
LEDs: 2 x 0.5 Watt SMT LEDs
Brightness: 85 Lumens
Voltage: 6V DC
Light Duration: Approximately 30 seconds
Detection Angle: 90˚ (cone)
Maximum Detection Distance: 20 ft (6.5 m)
Housing Weatherproof Rating: IP33
Circuitry Weatherproof Rating: IP44
V1