Maxsa Innovations Dual Head Solar LED Spotlight - Manual (Page 4)

V12.5
2012
[email protected]
ONE YEAR LIMITED WARRANTY
This product is warranted against faulty material and /or workmanship for a period of 1 year from date of original purchase. The obligation of the manu-
facturer, under this warranty, is limited to servicing and replacing defective parts when the unit is returned to MAXSA Innovations, freight pre-paid during
the warranty period. To obtain warranty repair, the purchase receipt should be returned with the product.
This warranty becomes void on any unit which has been tampered with, damaged by accident, or damaged otherwise by improper operation. This
guarantee is in addition to any guarantees implied by State or Federal Legislation.
Please save these instructions for future reference.
Page 4
TROUBLESHOOTING
PROBLEM SOLUTION
Light will not switch
on when there is
movement in the
detection area.
The LUX control may be set too far towards the () position.
Reposition the motion sensor. Light switches on
during the day.
Moving trees, traffic, pets or birds may be getting in the area of detection.
This may be unavoidable, however the sensor could be redirected to a height
where this is less likely to occur.
If there are reflective objects in the detection area such as windows, water,
or white walls, you may need to redirect or possibly reposition the motion
sensor.
Test the motion sensor by covering it completely with cardboard and waiting
several minutes to make sure it does not detect motion. If the light still
switches on, please contact MAXSA for further assistance.
Light switches on
for no apparent
reason.
Ensure that the power switch on the main body has been turned to
the ON position.
Ensure that the motion sensor has been positioned to face oncoming move-
ment.
Ensure that the batteries have been fully charged in direct sunlight for 3
sunny days. Refer to the “Before First Use of Your Solar Security Light”
section on page 4.
Check to see that the solar panel is facing south so that it receives direct
sunlight for most of the day, enabling the batteries to fully charge.
Check to see that the LUX control has not been set too far towards (  ).
Setting the LUX control too far towards (  ) will cause the Solar Security Light
to turn on only in complete darkness.
Check to see that the motion sensor is not near night time light sources such
as street lights.