Maxsa Innovations Solar-Powered 100 LED Motion-Activated Outdoor Security Floodlight - Manual (Page 5)

5
motIon sensor adjustment (sens)
the motion sensor on this solar security light is temperature-sensitive. the cooler
the temperature, the more sensitive the motion sensor will become. use the sens
dial to adjust the sensitivity of the motion sensor to compensate for environmental
temperature changes. the motion sensor is most sensitive when the sens dial is
turned fully clockwise (+).
to decrease sensitivity, move the dial toward the ( – ) symbol.
to increase sensitivity, move the dial toward the ( + ) symbol.
to test the motion sensitivity, aim the sensor head toward the desired area. set
the tiMe dial to minimum ( – ) position and the luX dial to the bright setting ().
Walk slowly around the area of detection, changing your walking pace until the
light comes on. if light does not come on, you may need to adjust the angle of the
sensor unit. Make adjustments as needed until the desired level of sensitivity is
reached. Re-adjust the tiMe and sens dials when complete.
lIght level adjustment (luX)
the luX dial controls the natural light level that triggers the solar security light
and prevents the light from operating during daylight hours.
your solar security light comes preset for activation at dusk.
to adjust for activation in a brighter setting, move the dial toward bright ()
to adjust for activation in a darker setting, move the dial toward dark (
) .
replacIng the battery
When the charging ability of the batteries decreases, you can replace the battery
with a new 6V, 4ah lead acid battery. follow the steps below when replacing the
battery.
1. first remove the main unit from its mounted surface and unplug the solar
panel.
2. Move the power switch on the main body to the off position.