Pure DTM-300 - User Guide - Manual (Page 10)

Gr
eat Britain
8
Listening to FM radio
To listen to FM radio push the DAB/FM button until you see FM on the left of the
screen and the frequency display.
Selecting a station
To select a station either:
• press the SCAN buttons to step up/down the frequency range in steps
of 0.05 MHz or hold down for a second to seek to the next station with a
strong signal.
• press the +/- buttons to skip to the next/previous FM preset
• press a numbered button on the remote to select an FM preset directly
If you are listening to an RDS station you see the RDS icon on screen and
extra RDS information may be available as described below.
If you are listening to a stereo station you see the Stereo icon ( )on
screen.
Changing the information displayed
To change what you see on screen while you listen to FM radio push the
Display button. Choose between the following options:
RadioText Dynamic text broadcast by some RDS stations.
Broadcast info Description of the content broadcast by the station and its
frequency. RDS stations only.
Date and time Date and time obtained from the FM signal. RDS stations
only.
Storing and recalling presets
You can store up to 9 of your favourite stations as presets which you can then
access quickly using the numbered buttons on the remote control.
To store a preset - Hold down the numbered button you want to store the
current station under. The preset is stored, overwriting any previous one.
To recall a preset - Press the numbered button for the preset you want to
listen to.
Changing FM stereo mode
To change between Stereo and Mono press the Menu button, select FM mode
and choose between Stereo or Mono. Mono may be clearer for stations with
weak signals. The current mode is shown on the top line of the display.