Pure Sirocco 550 - User Guide - Manual (Page 8)

8
Wi-Fi settings
These settings are only available when using a Wi-Fi connection. Press Options from either The
Lounge or Media player, then select Network settings to view options for configuring your Wi-Fi
network connection.
Connection wizard
Scans for and connects to available wireless networks.
View details
Displays the configuration of the wireless network that Sirocco 550 is connected to:
Network name The network name (SSID) is shown at the top of the screen.
Encryption The encryption method is listed (WEP, WPA or WPA2).
IP address Sirocco 550’s IP address.
Net mask The configured network mask.
DNS Domain Name Server IP address.
Router Gateway router IP address.
Radio Name The name used to identify your Sirocco 550 on the Lounge website.
MAC address MAC address (a fixed address that identifies your Sirocco 550).
Access point MAC address of the wireless router that Sirocco 550 is connected to.
Manual setup
Manually configure your wireless network settings (for advanced users only).
Retry connection Attempts to reconnect to the selected network.
Network name Scan for networks or Enter SSID manually to specify a new SSID for your
wireless network.
Encryption mode Change the encryption mode between WEP, WPA (PSK), WPA2 (PSK) or None .
Sirocco 550 automatically detects the mode for your network. Only change this
setting if you think the encryption mode is incorrect.
Key or password Enter a new encryption key or password.
IP address Choose between DHCP (dynamic) or Static .
Clear network settings
Deletes previous Wi-Fi connections, passwords and settings and performs a fresh network scan.
Select network type
Changes your connection type between Wi-Fi and Ethernet.
Wi-Fi settings
Connection wizard
View details
Manual setup
Wi-Fi settings screen