Pure Sirocco 550 - User Guide - Manual (Page 4)

4
Snoozing or cancelling a sounding alarm
Cancel an alarm by pressing Alarms, Options or Standby ( ), or snooze the alarm by tapping
Snooze .
Adjusting the snooze time
The default alarm snooze time is 9 minutes. You can adjust this if you would prefer a different
snooze duration.
1. Press the Alarms button or press Options and select
Alarm or timer .
2. Select Snooze time . Use the Select dial to adjust the duration of the snooze.
Using the sleep timer
The sleep timer switches Sirocco 550 into standby after a set period of time.
Setting the sleep timer
1. Press the Alarms button or press Options and select Alarm or timer .
2. Select Sleep timer .
3. Use the Select dial to adjust the length of the sleep timer in 15 minute steps.
A set sleep timer is indicated by in the icon bar.
Cancelling a sleep timer
To cancel a sleep timer, return to the sleep timer settings and press Clear or switch Sirocco 550
into standby.
Setting the clock
The clock will automatically set itself using your network connection, or a digital/FM radio signal.
However, if you cannot receive an updated time, or see the message ‘
Time not available ’, the time
and date can be set manually.
1. Press the Alarms button or press Options and select
Alarm or timer .
2. Select Set Clock .
3. Use the Select dial to adjust the time and date. Tap or to move to the previous or next
setting.
4. Tap OK to save.
00:15
Sleep timer (hh:mm)
OK Clear Save Menu
Set clock
OK
07:00 hh:mm
13 05 2011 dd mm yyyy
Adjusting the sleep timer
Setting the clock