Pure Chronos II - Manual (Page 4)

2
Plug the mains adapter into the mains supply (step C) and wait for the unit to switch
on.
Star t
Quick set up > Overview of controls and connectors > Symbols on the screen
Star t
Wait until Chronos II completes an autotune for available DAB stations and tunes to a
DAB station (this takes about 1 and a half minutes).
Set energy saving mode.
When you see the message ‘Enable energy saving?’ press the Select button
Select ‘On’ or ‘Off’ to switch energy saving mode on or off (use the Select and
+/− buttons).
When energy saving mode is switched on, the radio uses less than 1 Watt of power in
standby because it does not collect and store Intellitext messages in standby. It still
collects and stores Intellitext messages when the radio is switched on.
You can switch energy saving mode on or off at any time in the energy saving menu.
For more information: Intellitext > page 9 energy saving mode > page 11
Uncoil the aerial wire and hang it vertically (step A), then insert the jack of
the supplied mains adapter into the bottom of the unit (step B).
A
C
EcoPlus
Enable energy
saving? On
On
PURE CHRONOS || Now tuning... BBC Radio 2
talking to the p
5.5V DC
5.5 V DC
B
1.5