Pure Chronos II - Manual (Page 13)

11
Options
Options available in FM
FM stereo mode ( Menu > FM stereo mode)
Choose from Stereo or Mono (default). Mono may improve audio clarity where stereo signals are
weak.
General options
Energy saving ( Menu > Energy saving)
Chronos II is designed and manufactured to minimise power consumption when the unit is
switched on and to use less than 1 Watt in standby. One way this low power consumption is
enabled is by not collecting and storing Intellitext messages when the unit is in standby. You can
override this option by switching off energy saving mode, but this will increase standby power
consumption. Two options are available:
Energy saving On (the default setting)
Intellitext will be collected when you have been tuned for a short while to a station that
broadcasts Intellitext. Intellitext data is not collected in standby, reducing power consumption.
Energy saving Off
Chronos II collects Intellitext data in standby from the station for which you last viewed
Intellitext data, which increases standby power consumption.
Upgrade ( Menu > Upgrade)
Upgrades to the radio’s firmware may be issued for Chronos II in the future to provide enhanced
functions or improve performance. If you register your product and include an e-mail address you
will receive e-mail notification of any new upgrades for your product that are added to the support
website at www.pure.com/support
How do I upgrade my radio?
If an upgrade has been issued for Chronos II you can upgrade your radio using a PC
connected to the USB port. To upgrade, select ‘Upgrade’ and follow the instructions provided
with the upgrade software. Note: USB upgrade requires a PC (not a Mac) running Windows XP
and a suitable USB cable (not included).
To display the version number of your radio’s firmware hold down the Info button for three
seconds.
Clock ( Menu > Set clock)
Clock set
Manually set the time and date if required. If you have a DAB signal and/or good FM (RDS)
reception these will updated automatically.
This product has a special
energy-saving standby mode