Pure PocketDAB 1000 - Manual (Page 20)

18
Adjusting the eq settings
The eq button enables you to apply one of six equalisation presets to
the received audio. The selected eq setting is displayed on the top
line of the display using the following icons:
( ) Flat - no eq applied to the signal
( ) Bass - boosts the bass and mid frequencies
( ) Monitor - boosts the treble and mid frequencies
( ) Studio - boosts the midrange frequencies
( ) Club - boosts the bass frequencies with some treble
( ) Arena - boosts the bass and treble frequencies
Hints and tips
PocketDAB 1000 is designed to be used wherever you want.
The following advice should help you get the most from your unit.
Maximising reception
To maximise reception avoid coiling the headphone cable. The
headphone cable also acts as the aerial for your PocketDAB 1000,
for optimum signal reception allow the cable to hang freely.
Moving to a different area
When you move around with your unit you may find that you lose
reception. This may be due to entering a poor reception area or
moving out of range of a transmitter. In this case we recommended
that you perform an autotune to refresh the list of available stations,
see Autotune UK and full on pages 13 and 14 for details.
Note The autotune process will not remove existing stations from your
station list so they will be available if you move back into the area.