Pure PocketDAB 1000 - Manual (Page 16)

14
Autotune full - scans the full range of digital frequencies in Band III.
This may take a minute or more. This option is primarily intended
for use outside the UK where other Band III transmissions may be
available.
You can cancel autotune by pressing the DABnav button again
during the tuning process.
The display will indicate tuning is underway. When finished, the
PocketDAB 1000 will return to the station you were listening to
and you will hear it through the earphones. All the stations found
are now stored in the unit and you can select another station as
described in Selecting stations on page 9.
If no stations are found, you see the message ‘No stations available’
and the display shows an option menu, see If no stations are found
during the autotune on page 8 for details of this menu. Check your
headphones are connected and try one of the available tuning
options.
Station Order
Sets the order in which stations appear on the station list.
When you select this option you see the currently selected order on
the top row of the display and a scroll list on the bottom.
Rock the DABnav button left or right to scroll through the following
options and press to select one:
Alphanumeric Displays all stations in alphanumeric order. This is
the default setting.
Fav station Displays the ten most listened to stations at the
top of the station list in alphanumeric order and
the remainder below. Your favourite stations are
compiled by your PocketDAB which monitors how
long you listen to each station. Favourite stations