Pure Avanti Flow - User Guide - Manual (Page 37)

37 Listening to an Auxiliary device AVANTI Flow Owner’s Manual v1.0
7
Listening to an Auxiliary device
You can use AVANTI Flow to amplify the music stored on a portable music player including iPods
which are not compatible with AVANTI’s iPod dock. All you need is a 3.5mm to 3.5mm auxiliary lead
(not supplied).
7.1 Connecting an auxiliary device
To connect an auxiliary device
1 Connect one end of the auxiliary lead into the Headphone or Line out connector on your
portable music player.
2 Connect the other end into the ‘AUX IN’ connector on the rear of AVANTI Flow.
7.2 Selecting the Auxiliary input source
To play an auxiliary device
1 Press Source or Back until the Source screen appears.
2 Highlight and select ‘ Auxiliary input’ to enter Auxiliary source.
3 Press Play and adjust the volume on the auxiliary device.
Listening to an Auxiliary device
08.15
Fri 12 Sep 2008
OK Options
AUX