Pure Avanti Flow - User Guide - Manual (Page 33)

33 Docking and playing your iPod AVANTI Flow Owner’s Manual v1.0
5
Docking and playing your iPod
AVANTI Flow can amplify music files stored on your iPod through the speakers.
5.1 Docking your iPod
Select the correct adapter.
1. Open the box containing the iPod Dock Adapters and select the adapter that is compatible with your
model of iPod as detailed in the table below. Insert the adapter into the iPod dock on top of your
AVANTI Flow wih the adapter number facing the rear of the radio.
Dock Adapter number (9-17)
Dock
Adapter
numbe
r
iPod
5th generation
(video)
iPod
nano
2nd generation
(aluminium)
iPod
nano
3rd generation
i Pod
nano
4th generation
iPod
classic
iPod
touch
iPod
touch
2nd generation
9 30 GB 80/120 GB
10 60/80 GB 160 GB
11 2/4/8 GB
13 4/8 GB
14 8/16GB
16 8/16/32GB
17 8/16 GB
A compatible Dock Adapter is provided with most iPod models. If your model of iPod ™
is not listed in the table, and if you do not already have a compatible Dock Adapter, we
recommend that you purchase the correct type from Apple.
The table above lists the seven included Dock Adapters and the iPod models they are ™
compatible with. AVANTI Flow is compatible with the above iPod models that connect
to the iPod Universal Dock, other models can be connected using the 3.5mm auxiliary
input, but you will be unable to control them using either your AVANTI Flow or remote.
2. Slot your iPod onto the connector. Make sure that it fits snugly with the correct adapter.
Your AVANTI Flow will begin to charge your iPod if necessary. Charging will stop when the iPod is
fully charged (check the iPod screen).