Pure Avanti Flow - User Guide - Manual (Page 35)

35 Listening to FM radio AVANTI Flow Owner’s Manual v1.0
AVANTI Flow is also a fully featured FM radio. This chapter explains how to operate AVANTI Flow in
the FM source, including seek and manual tuning and storing presets. You should extend the aerial for
optimum reception of FM broadcasts.
6.1 Selecting the ‘FM radio’ audio source
Select ‘FM radio’ source
1 Press Source or Back until the Source screen is displayed.
2 Highlight and select ‘ FM radio’ to enter the FM source.
6.2 Changing the station
Seek tuning (default)
1 Use the navigation buttons to seek to the next or previous FM station that has a strong signal.
2 RDS information, if available, will scroll down the screen after a few minutes.
3 Use the navigation buttons again to seek for a new frequency.
6.3 Using presets
To store an FM station as a preset
1 Tune to the frequency you want to store as a preset and press Presets.
2 Use the navigation buttons to highlight a preset number between 1 and 10.
3 Press Store to store the preset to that position on the preset list.
Listening to FM radio
103.30
Searching...
OK Presets Options
XFM
OK Presets Options
XFM
6
Listening to FM radio