Pure Evoke Flow - Manual (Page 18)

16
Display options
Use this to adjust display settings, such as screen duration, brightness and the information displayed
while you are listening to each source. Tap Options then turn and press the Select dial to open the
Display menu.
Information
Different information displays are available for each audio source:
Digital/FM
Scrolling text: Text information broadcast by the current station. May include song titles, program
details, news, etc.
Reception info: Displays the current frequency and signal strength.
Time and date: Displays the date with a full-screen clock (as in standby mode).
Pure Connect
Choose Description (default) Location and Genre, Time offset, Wi-Fi signal strength, Station URL or
Time and date.
Media player
Track info: Displays artist and album information (id3 tags).
Time offset/duration: Displays a progress bar and timers indicating the current track position.
Wi-Fi signal strength: Displays a bar indicating the current Wi-Fi signal strength.
Time and date: Displays the date with a full-screen clock (as in standby mode).
Active and Standby operation
You can adjust how long the screen is illuminated for and the brightness of the screen when Evoke Flow
is switched on or in standby.
Screen duration
Choose Active operation and then Screen duration to adjust the display settings that apply when
Evoke Flow is switched on or Standby operation and then Screen duration to adjust the display
settings that apply when Evoke Flow is in standby. Choose from Always on or Off after 7 seconds.
Brightness
Choose Active operation and then Brightness to adjust the screen’s brightness level when Evoke
Flow is switched on or Standby operation and then Brightness to adjust the screen’s brightness when
Evoke Flow is in standby.
Setting the clock
The clock will automatically set itself using your network, digital radio or FM signal. However, if you
cannot receive an updated time signal, or see the message ‘Time not available’, you can manually set
the time and date. To do this:
1. Tap Options and turn and press the Select dial to select Alarm or timer.
2. Turn and press the Select dial to select Set clock.
3. Turn and press the Select dial to adjust the time and date.
4. Tap
or to move to the previous or next setting.
5. Tap OK when you have finished setting up the time and date.
3. Turn and press the Select dial to adjust the time and date.
4. Tap
or to move to the previous or next setting.
5. Tap OK when you have finished setting up the time and date.