Pure Evoke Flow - Manual (Page 7)

5
Controls and sensors
1
2
4
5
3
No. Control Description
1 Context-sensitive
touch buttons Tap the button that corresponds to the function shown on screen that you
want to use.
2
Back ( )
Tap to display the Source menu then choose between Pure Connect, Media
player, FM radio and Auxiliary input. Tap when browsing stations to go back to
the previous list. Tap in the Options menu to go back to the previous screen.
3 Volume/mute dial Turn to adjust volume. Push to mute and un-mute.
4 Select dial Turn to navigate menus, stations or options and push to select an item. Push to
pause a media track or podcast.
5 Standby touch
key
Tap followed by OK to switch Evoke Flow on; do this again to switch Evoke
Flow into standby (or off if powered by a ChargePAK E1).
6 SnoozeHandle Tap to snooze the alarm for 9 minutes. Grip and hold to brighten the display to
maximum brightness for 3 seconds. (Does not work when Evoke Flow is powered
by a ChargePAK E1.)
7 Light sensor Adjusts the display brightness according to the light levels in your room (only
works when brightness level is set to ‘Automatic’).
7
6