Pure Evoke Flow - Manual (Page 16)

14
Setting alarms and timers
Evoke Flow has two alarms and two types of timers (kitchen and sleep). To set up an alarm or a timer, tap
Options and select Alarm or timer.
Setting an alarm
1. From the Alarm or timer menu, turn and press the Select dial to select either Alarm 1 settings or
Alarm 2 settings and tap Edit.
2. Turn and press the Select dial to turn the alarm On or Off.
3. Turn the Select dial to adjust the hours and press to confirm. Repeat to set the minutes. Repeat to
specify AM or PM.
4. Turn the Select dial to set the days the alarm sounds. Choose between Once only, Daily,
Weekdays, Weekends, Every Saturday and Every Sunday then press the Select dial to confirm.
5. Turn the Select dial to set the alarm type. Choose between Pure Connect station, FM radio or
Tone then press the Select dial to confirm.
6. If you’ve set the alarm type as Pure Connect station or FM radio, turn the Select dial to choose
between Last tuned (last station tuned to) or select a favourite Pure Connect station or FM preset if
you have any saved.
7. Turn the Select dial to change the alarm volume and press to confirm.
8. A set alarm is indicated by
in the icon bar.
Note: Any alarms that are set will not go off if Evoke Flow is being powered by a ChargePAK.
Setting the sleep timer
The sleep timer switches your radio into standby after a specified amount of time. From the Alarm or
timer menu, select Sleep timer. Use the Select dial to adjust the length of the sleep timer in 15 minute
steps from 15 mins to 1 hour 30 mins. Tap Save to store.
A set sleep timer is indicated by
in the icon bar.
Setting the kitchen timer
The kitchen timer sounds a beeping tone after a set period of time.
From the Alarm or timer menu select Kitchen timer and use the Select dial to adjust the length of time.
Tap
Mins to toggle between minutes and hours. Tap Save to confirm.
A set kitchen timer is indicated by in the icon bar.
Cancelling a sounding alarm or timer
To cancel a sounding alarm or timer, push either the Select or Volume dial. A sounding alarm will
automatically cancel after 1 hour.
Note: Pushing the Volume dial will not cancel a tone alarm.
Warning: When powered by ChargePAK E1, tapping Standby switches the radio off and any set alarm or
timer will not sound.
Snoozing a sounding alarm
Tap the SnoozeHandle to snooze a sounding alarm for the specified time (default 9 minutes).
Changing the alarm snooze time
From the Alarm or timer menu, select Snooze time. Use the Select dial to adjust the duration of the
snooze from 5 to 15, then either 20/25/30/40 minutes, or 1 hour.
Cancelling a snoozing alarm
To cancel a snoozing alarm push either the Select or Volume dial.