Outback Power Systems AXS Port SunSpec Modbus Interface Owners Manual - Manual (Page 19)

900-0138-01-00 Rev B 17
Specifications
Regulatory Specifications
Table 7 Regulatory Specifications
Specification Details
FCC Compliance Part 15, subpart B
CE Compliance Yes
RoHS Compliance Yes
Device Specifications
Table 8 Device Specifications
Specification Details Additional Data
Power Supplied by OutBack device
Status Indicators Seven LED indicators
Clock On-board real-time clock with battery
backup
Internet Standards TCPIP, DNS, SMTP, FTP, DHCP, NTP
Hub/Device RJ-45
Communications RJ-45 Ports
Temperature Sensor RJ-11
Communication Protocol Modbus TCP to the SunSpec standard
OutBack Device Interface OutBack Proprietary
PC Interface 10/100 Ethernet
Mounting DIN clip (provided) or surface mounting
Environmental Rating Indoor Type 1 (IP 30)
non-condensing
AXS Port: -40°C to 75°C Temperature Ranges
SD Card: -25°C to 75°C
Unit 0.5 lb (0.23 kg) Weight
Shipping 2.1 lb (0.95 kg)
Unit 1.29" x 3.5" x 4.99"
(3.3 x 8.9 x 12.7 cm) Dimensions - (H x W x D)
Shipping 3.25" x 9" x 13.5"
(19 x 22.9 x 34.3 cm)
SD Card Size MicroSD Type 2 2 GB capacity
Options OutBack RTS
Factory Default Settings
The AXS Port comes written with these settings. The unit will revert to these settings when the reset
switch is used (see page 3).
¾ IP Address 192.168.0.64
¾ Netmask 255.255.255.0
¾ Gateway 192.168.0.1
¾ DNS 1
4.2.2.1
¾ DNS 2 4.2.2.2
¾ DHCP disabled
¾ Modbus port 502
¾
Encryption disabled