Night Owl PE-DVR8 user manual - Manual (Page 73)

Chapter 20: Maintenance Menu
73
20.1 Basic Menu
The Basic Menu allows you to perform firmware upgrades and maintain the
DVR’s performance.
To access the Basic Menu, select the Maintenance button and then select
Basic.
• Auto Maintain: Allows you to choose when you would like your
system to automatically reboot. The DVR will reboot automatically
on a specified schedule to help prevent system and hard drive
failure and to preserve the life your DVR.
• Time: Allows you to choose a time when you would like the DVR to
reboot. Keep in mind that the DVR is set to military (24-hour) time.
• Firmware Upgrade: Performs a firmware upgrade from a USB
flash drive.
• Standby: Puts the DVR into standby mode.
• Reboot: Restarts the DVR.