beautypg.com

Chapter 14: basic menu – Night Owl PE-DVR8 user manual User Manual

Page 28

background image

28

Chapter 14: Basic Menu

 

 

 

14.1 System Menu

 

The System Menu allows you to change the language, output resolution,

logout time, and turn the Startup Wizard on/off. It is recommended that you

leave the Device Name and Remote ID fields at their default values. To

access the System Menu, select the Basic button, and then select System

from the list on the left side of the screen.

 

 

 

 

 

 

 

 

 

 

 

Device Name: Displays the DVR you are using.

 

Remote ID: Indicates the number of the DVR if there are multiple

DVRs at one location.

Video Format: Leave this setting at NTSC unless you are using a

PAL-format TV.

VGA Resolution: Select the resolution of the video output from the

VGA port. The larger the number, the better the resolution will be.

(However, a higher resolution will use more hard disk space when

recorded video is stored.) Refer to your TV/monitor manual to see

which resolution works best.

Language: Set the language to English, French, or Spanish.

 

Logout Time: This will allow the DVR to logout the user that is

signed into the DVR after a certain amount of time.

Startup Wizard: Allows you to turn the Startup Wizard on/off when

the DVR is rebooted/turned on.