Night Owl PE-DVR4 user manual - Manual (Page 28)

Chapter 14: Basic Menu
28
14.1 System Menu
The System Menu allows you to change the language, output resolution,
logout time, and turn the Startup Wizard on/off. It is recommended that you
leave the Device Name and Remote ID fields at their default values. To
access the System Menu, select the Basic button, and then select System
from the list on the left side of the screen.
• Device Name: Displays the DVR you are using.
• Remote ID: Indicates the number of the DVR if there are multiple
DVRs at one location.
• Video Format: Leave this setting at NTSC unless you are using a
PAL-format TV.
• VGA Resolution: Select the resolution of the video output from the
VGA port. The larger the number, the better the resolution will be.
(However, a higher resolution will use more hard disk space when
recorded video is stored.) Refer to your TV/monitor manual to see
which resolution works best.
• Language: Set the language to English, French, or Spanish.
• Logout Time: This will allow the DVR to logout the user that is
signed into the DVR after a certain amount of time.
• Startup Wizard: Allows you to turn the Startup Wizard on/off when
the DVR is rebooted/turned on.