Dee Zee DZ760082 - Manual (Page 2)

Installation Instructions
Rear Receiver Rack DZ 760082
Included Components: Tools Needed:
(2) Rack Trays (1) 16mm socket
(1) 2” Receiver Center Bar (1) Adjustable Crescent wrench
(2) Brace Brackets – curved (1) 10mm socket
(24) M6 (10mm) Flat Washer (1) Socket Wrench
(12) M6 (10mm) Lock Washer
(12) M6 (10mm) Nylock® Nut Important Notice:
(12) M6 (10mm) Hex Head Bolt This rack has been supplied with
(2) Rack Tray Connecting Plate all needed hardware for proper
(14) M10 (16mm) Flat Washer assemble. Rack can be installed
(7) M10 (16mm) Lock Washer into any standard 2” receiver.
(3) M10 X 75mm Hex Head Bolt Please note that receiver pin is
(4) M10 X 25mm Med. Hex Head Bolt NOT supplied with rack and will
(3) M10 (16mm) Hex Head Nut needs to be purchased separately.
CAUTION: NEVER EXCEED THE TONGUE WEIGHT CAPACITY OF YOUR HITCH –
Receiver Rack is rated to 200Lbs evenly distributed .