Dee Zee DZ95710 - Manual (Page 6)

Page 6 of 12
DZ 95710 8/2/13
Tailgate installation is a reverse process of removing the
factory tailgate. Slide driver side tube hinge of the tailgate
on to the mounting pin of the bed. Lay back tailgate 30-45
degrees until notch in passenger side tailgate hinge is
parallel with the mounting pin. Slide tailgate hinge on to
mounting pin of the bed. Reattach cables to bed mounting
points. Close Tailgate. If there is excess movement in the
hinge and latch won’t hit striker pin correctly refer to step
5a.
5 Tailgate Installation
5a Alternate-Nylon Insert
Depending on model year of your Chevy truck the tailgate
hinge pin can vary in size. If after step 5 the latch won’t hit
striker on truck correctly and there is excess movement in
the hinge insert (D) TGNYLONSLEEVE5 into the previously
installed (B) TGNYLONSLEEVE2L tube hinge bracket on the
driver side of the tailgate.
A
B
D